2V0-41.24 Free Practice & Instant 2V0-41.24 Discount

Blog Article

Tags: 2V0-41.24 Free Practice, Instant 2V0-41.24 Discount, Valid 2V0-41.24 Dumps Demo, Reliable 2V0-41.24 Exam Testking, New 2V0-41.24 Test Vce Free

Our 2V0-41.24 study dumps are suitable for you whichever level you are in right now. Whether you are in entry-level position or experienced exam candidates who have tried the exam before, this is the perfect chance to give a shot. High quality and high accuracy 2V0-41.24 real materials like ours can give you confidence and reliable backup to get the certificate smoothly because our experts have extracted the most frequent-tested points for your reference, because they are proficient in this exam who are dedicated in this area over ten years. If you make up your mind of our 2V0-41.24 Exam Questions after browsing the free demos, we will staunchly support your review and give you a comfortable and efficient purchase experience this time.

VMware 2V0-41.24 Exam Syllabus Topics:

Topic	Details
Topic 1	VMware Solution: This section measures the skills of VMware NSX Networking professionals and covers knowledge of the VMware Virtual Cloud Network and NSX. Candidates will demonstrate an understanding of the NSX management cluster and the data plane, focusing on how these components interact to provide network virtualization.
Topic 2	Troubleshoot and Optimize the VMware Solution: This section evaluates the skills of VMware Networking Professionals in troubleshooting and optimizing NSX solutions. Candidates will use log files to identify issues, including locating default log file locations and generating log bundles to assist in diagnostics.
Topic 3	Install, Configure, and Administrate the VMware Solution: This domain targets VMware System administrators and emphasizes preparing an NSX infrastructure for deployment. Candidates will learn to create transport zones and configure essential components necessary for a functional NSX environment.

>> 2V0-41.24 Free Practice <<

Instant 2V0-41.24 Discount - Valid 2V0-41.24 Dumps Demo

Our VMware NSX 4.X Professional V2 exam questions provide with the software which has a variety of self-study and self-assessment functions to detect learning results. The statistical reporting function is provided to help students find weak points and deal with them. This function is conductive to pass the VMware NSX 4.X Professional V2 exam and improve you pass rate. Our software is equipped with many new functions, such as timed and simulated test functions. After you set up the simulation test timer with our 2V0-41.24 Test Guide which can adjust speed and stay alert, you can devote your mind to learn the knowledge. There is no doubt that the function can help you pass the VMware NSX 4.X Professional V2 exam.

VMware NSX 4.X Professional V2 Sample Questions (Q97-Q102):

NEW QUESTION # 97
Which two tools are used for centralized logging in VMware NSX? (Choose two.)

A. VMware Aria Automation
B. VMware Aria Operations
C. VMware Aria Operations for Networks
D. VMware Aria Operations for Logs
E. Syslog Server

Answer: D,E

Explanation:
Two tools that are used for centralized logging in VMware NSX are Syslog Server and VMware Aria Operations for Logs. Syslog Server is a standard protocol for sending log messages from various network devices to a centralized server1. VMware NSX supports syslog for long term retention of logs and all NSX components can send syslog messages to a configured syslog server2. VMware Aria Operations for Logs is a VMware product that provides intelligent log analytics for NSX3. It provides monitoring and troubleshooting capabilities and customizable dashboards for network virtualization, flow analysis, and alerts3. The other options are incorrect because they are not tools for centralized logging in VMware NSX. VMware Aria Operations is a VMware product that provides operations management and automation for NSX4, but it is not the same as VMware Aria Operations for Logs. VMware Aria Automation is a VMware product that provides automation and orchestration for NSX5, but it is not related to logging. VMware Aria Operations for Networks is not a valid product name.
Reference: Syslog, NSX Logging and System Events, VMware vRealize Log Insight for NSX, VMware vRealize Operations Management Pack for NSX, VMware vRealize Automation

NEW QUESTION # 98
Which two of the following features are supported for the Standard NSX Application Platform Deployment? (Choose two.)

A. NSX Network Detection and Response
B. NSX Malware Prevention Metrics
C. NSX Intrinsic Security
D. NSX Intrusion Detection and Prevention
E. NSX Intelligence

Answer: A,B

Explanation:
The NSX Application Platform Deployment features are divided into three form factors: Evaluation, Standard, and Advanced. Each form factor determines which NSX features can be activated or installed on the platform1. The Evaluation form factor supports only NSX Intelligence, which provides network visibility and analytics for NSX-T environments2. The Standard form factor supports both NSX Intelligence and NSX Network Detection and Response, which provides network threat detection and response capabilities for NSX-T environments3. The Advanced form factor supports all four features: NSX Intelligence, NSX Network Detection and Response, NSX Malware Prevention, and NSX Metrics1.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/nsx-application-platform/GUID-85CD2728-8081-45CE-9A4A-D72F49779D6A.html

NEW QUESTION # 99
In an NSX environment, an administrator is observing low throughput and congestion between the Tier-O Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)

A. Configure a Tier-1 gateway and connect it directly to the physical routers.
B. Add an additional vNIC to the NSX Edge node.
C. Deploy Large size Edge node/s.
D. Configure NAT on the Tier-0 gateway.
E. Configure ECMP on the Tier-0 gateway.

Answer: C,E

Explanation:
ECMP (Equal Cost Multi-Path) is a routing protocol that increases the north and south communication bandwidth by adding an uplink to the tier-0 logical router and configure it for each Edge node in an NSX Edge cluster2. The ECMP routing paths are used to load balance traffic and provide fault tolerance for failed paths2. The tier-0 logical router must be in active-active mode for ECMP to be available2. A maximum of eight ECMP paths are supported2. Configuring ECMP on the tier-0 gateway can address low throughput and congestion by distributing the traffic among multiple paths and avoiding bottlenecks.
Deploying Large size Edge node/s can also address low throughput and congestion by providing more resources (memory, CPU, disk) for the Edge node to handle the network traffic. The NSX Edge VM system requirements vary depending on the appliance size, which affects the bandwidth, NAT/firewall, load balancer, and VPN capabilities of the Edge node1. A Large size Edge node has 32 GB memory, 8 vCPU, 200 GB disk space, and can support 2-10 Gbps bandwidth, L2-L4 features, and L7 load balancer1. An Extra Large size Edge node has 64 GB memory, 16 vCPU, 200 GB disk space, and can support more than 10 Gbps bandwidth, L2-L4 features, L7 load balancer, and VPN1. Deploying a larger size Edge node can improve the performance and capacity of the tier-0 gateway.
Reference: 2: Understanding ECMP Routing - VMware Docs(https://docs.vmware.com/en/VMware-NSX- T-Data-Center/3.2/administration/GUID-443B6B0D-F179-429E-83F3-E136038332E0.html) 1: NSX Edge VM System Requirements - VMware Docs(https://docs.vmware.com/en/VMware-NSX-T-Data- Center/3.2/installation/GUID-22F87CA8-01A9-4F2E-B7DB-9350CA60EA4E.html) Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-
443B6B0D-F179-429E-83F3-E136038332E0.html

NEW QUESTION # 100
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

A. net-dvs
B. esxcli network nic list
C. esxcli network ip interface ipv4 get
D. esxcfg-vmknic -l
E. esxcfg-nics -l

Answer: C

Explanation:
The esxcli network ip interface ipv4 get command is used to display the IP address configuration of the VMkernel network interfaces, including those used for the Geneve protocol.
The esxcfg-vmknic -l command lists all VMkernel network interfaces, including their IP addresses, which can help identify the VMkernel port for the Geneve protocol.

NEW QUESTION # 101
Which two of the following are used to configure Distributed Firewall on VDS? (Choose two.)

A. vSphere API
B. NSX CU
C. NSX API
D. vCenter API
E. NSX UI

Answer: C,E

Explanation:
According to the VMware NSX Documentation, these are two of the ways that you can use to configure Distributed Firewall on VDS:
NSX API: This is a RESTful API that allows you to programmatically configure and manage Distributed Firewall on VDS using HTTP methods and JSON payloads. You can use tools such as Postman or curl to send API requests to the NSX Manager node.
NSX UI: This is a graphical user interface that allows you to configure and manage Distributed Firewall on VDS using menus, tabs, buttons, and forms. You can access the NSX UI by logging in to the NSX Manager node using a web browser.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-0DEF9F18-608D-4B5C-9175-5514750E901B.html

NEW QUESTION # 102
......

You can save a lot of time for collecting real-time information if you choose our 2V0-41.24 study guide. Because our professionals have done all of these collections for you and they are more specialized in the field. So the keypoints are all contained in the 2V0-41.24 Exam Questions. Besides, in order to ensure that you can see the updated 2V0-41.24 practice prep as soon as possible, our system will send the updated information to your email address as soon as possible.

Instant 2V0-41.24 Discount: https://www.exam4free.com/2V0-41.24-valid-dumps.html

Report this page

2V0-41.24 FREE PRACTICE & INSTANT 2V0-41.24 DISCOUNT

2V0-41.24 Free Practice & Instant 2V0-41.24 Discount